Home / Shop / 5-Gal. SX5000 WB DOT Approved Water Based Silane Siloxane Penetrating Concrete Sealer, Brick Sealer, Paver Sealer, Natural Stone Sealer

5-Gal. SX5000 WB DOT Approved Water Based Silane Siloxane Penetrating Concrete Sealer, Brick Sealer, Paver Sealer, Natural Stone Sealer

Name: 5-Gal. SX5000 WB DOT Approved Water Based Silane Siloxane Penetrating Concrete Sealer, Brick Sealer, Paver Sealer, Natural Stone Sealer
Price: 78.99 USD
Availability: InStock

Quantity

ADD TO CART

BUY IT NOW

Detail
Material Resin
Brand Foundation Armor
Style Compact
Item Weight 45 Pounds
Item Dimensions LxWxH 13 x 13 x 15 inches

Water based, breathable, high solids Silane Siloxane sealer that can be used on interior and exterior, vertical and horizontal concrete, brick, and pavers.
Approved by the DOT as a water repellent sealer and can provide up to 10 years of performance.
Will maintain the natural, unsealed look and feel of the substrate.
Will reduce damage caused by snow and ice, road salts, mold and mildew, and staining.

DOT Approved In Several States
Armor SX5000 WB Water-Based Silane Siloxane Sealer for Concrete & Masonry
The Armor SX5000 WB is a penetrating water-based Silane-Siloxane sealer. It penetrates deep into the substrate where it chemically reacts to form a barrier within the pores that reduces surface water absorption by up to 95%. It will not change the look or color of the substrate, and it won't leave a visible surface film.

Contains up to 5X more active ingredients than similar products on the market.
Works entirely below the surface; won't leave a film or coating.
Long Lasting Silane-Siloxane Sealer for Concrete, Brick, Pavers, Natural Stone
Easy to Apply, Long Lasting
The Armor SX5000 WB can easily be applied with a roller or sprayer. Once fully cured, it can last for up to 7-10 years before the need to reseal!
Won't Change The Look or Color
The Armor SX5000 WB works entirely below the surface. It won't leave a slippery or visible surface film, and it won't change the look or color.
Breathable, UV Resistant
The Armor SX5000 WB is breathable and UV resistant. It will never yellow, peel, flake, or fade because it works entirely below the surface.
Reduces Water Absorption
The Armor SX5000 WB will reduce the absorption of surface water and other liquids by up to 95%, reducing damage caused by water absorption and salt.
Reduces Staining & Damage
Reduces Surface Stains
The Armor SX5000 WB reduces the absorption of water and other liquids by up to 95%. It helps keep liquids closer to the surface for easier cleaning.
Reduces Salt Damage
The Armor SX5000 WB will reduce damage caused by water absorption from the use of de-icing salts.
Reduces Surface Growth
The Armor SX5000 WB will reduce organic growths on the surface.
Reduces Cracking
The Armor SX5000 WB will reduce damage caused by freeze-thaw cycles and water absorption such as cracking, spalling, and pitting.
How To Apply
Surface Preparation:
The Armor SX5000 WB should be applied to a completely clean and dry surface. If the surface was cleaned with water or pressure washed prior to application, allow the surface to dry for at least 24 hours before sealing. While the surface may appear dry and feel dry to touch, water below the surface trapped in the pores can cause the same issues. While pressure washing the surface is typically sufficient, spot treatment may be necessary for deep or older stains. If the surface is smooth troweled, or does not easily accept water, acid etching may be required prior to applying sealer. It is always suggested to apply the Armor SX5000 WB to a test area to verify absorption, coverage, compatibility, and project suitability.
The Armor SX5000 WB is designed specifically for unsealed concrete and masonry surfaces. Do not apply this product over a surface recently sealed with a penetrating sealer, or previously sealed with a film-forming sealer or coating. The Armor SX5000 WB can be applied over surfaces treated with a Silicate sealer so long as it has been at least 7 days. It can also be re-applied to a surface previously treated with a Silane-Siloxane sealer so long as it has been a few years, and the surface is able to quickly and easily absorb water.
Application: A commercial pump sprayer is recommended to achieve the best coverage and results. Be sure the psi is no greater than 20. Use a .3-.5 GPM adjustable cone tip. Sprayer Suggestion: Armor Industrial Sprayer, ASIN B0CDXT17PD.
Apply the first coat of Armor SX5000 WB, ensuring the entire surface is evenly saturated. Wait at least 10-15 minutes, then apply the second coat. Do not flood the surface or allow puddles to form, this will result in over application and the formation of dark spots on the surface. Less porous surfaces, such as bluestone, flagstone, and slate, may only require one coat.
Substrates sealed with Armor SX5000 WB may be coated with silicone emulsion paints and many oil based paints once the surface has had 72 hours to dry. Testing is always necessary and recommended to assure proper adhesion. Adhesion may be improved if the surface is pressure washed and allowed to dry prior to application. Armor SX5000 WB is not a paint primer. Adhesion of cementitious coatings, stucco, plaster, etc., may be adversely affected. These types of substrate treatments should be installed and allowed to fully cure before applying Armor SX5000 WB. Always test to verify compatibility.
Time of Day: The temperature of the air and surface must be 55-85 degrees F during application. If freezing conditions exist prior to application, it is highly recommended that the substrate be allowed to fully thaw. Should this recommendation not be followed, the product may not yield adequate protective properties.
Once applied, the surface should be kept dry for at least 24 hours.
Clean-Up: Use warm water and soap. Dispose of containers in accordance with local and federal regulations.
Product Removal: Armor SX5000 WB penetrates deep into to the surface. Removal is not recommended.
Customer Reviews

No comments

SEE ALL